Bebob B290Cine, Руководство пользователя

Страница: 2 / 5

bebob factory GmbH
– Höglwörtherstr. 350 – D-81379 München – Tel.: +49 (0)89 8563 485-0
www.bebob.de
July 2021
Safety instructions

Only for professional use!

Keep batteries out of reach of children and personnel that has not been instructed in the
use of high capacity Lithium-ion batteries!

Use only with recommended charger.

Keep the battery dry and do not immerse in water.

Never open the case of the battery.

Do not expose to temperature over 60°C.

Do not expose the battery to fire! May explode if thrown into fire!

The maximum discharge current shall not be exceeded (see Specifications).

The maximum charge voltage shall not be exceeded (see Specifications).

Do not put the battery on a device when the red charging LED flashes.

Handle with care! Do not throw! Do not drop!
Charging

Never charge unattended

Remove flammable material from the charging area and avoid high external thermal Ioads.

Wait 30 Minutes after discharge before you put the battery on a charger.

The bebob battery can be charged with an external bebob charger (or equivalent using the
CC-CV method 16,8 V / 33,6V DC).

The maximum voltage shall not be exceeded (see Specifications).

Approximate charge time may vary depending on charger and temperature.

Charge the battery only within the specified temperature range. bebob batteries can be
charged in ambient temperature for optimum performance at 10°C - 30°C.

bebob batteries can be recharged in any state of charge condition

Fuel Gauge Flashing LED indicates State of Charge during Charging Process.
Discharging

The maximum discharge current shall not be exceeded (see Specifications).

When using the battery with video or lighting equipment, power consumption of the
equipment must be below specifications. For the protection of the battery, a load over or
equal to the max discharge current may activate the internal protection circuit and stop
supply of power. In this case the fuse will self-rest after a couple of minute.

Remove flammable material from the discharging area. Avoid high external thermal Ioads.

The end of discharge voltage shall not fall below the allowed Input Voltage (see
Specifications).

Charge the battery only within the specified temperature range. The battery can be used in
ambient temperature of - 20°C - + 55°C.

Do not use more than two batteries when a B90CineHS!

Never connect several B-Mount batteries in series!