Bebecar BOB XL LA3, Инструкция по эксплуатации

Страница: 13 / 40

GB
IMPORTANT - READ THE INSTRUCTIONS
CAREFULLY BEFORE USE AND KEEP
THEM FOR FUTURE REFERENCE
REMEMBER YOUR CHILD’S SAFETY IS YOUR RESPONSIBILITY
WARNING: This carrycot has been designed to be operated as shown in the instructions
supplied. Not to do so may cause damage and render your guarantee void.
A - Remove the apron, mattress and liner from the carrycot and engage the metal struts
towards the upright position as shown.
B - Then fit the mattress and liner to carrycot’s backrest as shown.
NB: The mattress liner makes part of the carrycot, so never use the carrycot without it.
C - The carrycot backrest can be raised or lowered by adjusting the metal support behind it.
D - To fit the hood, insert bayonet fitting into slots of the carrycot.
E - To remove the hood, press on the outside edge of the carrycot at the position of the
bayonet.
F - Slide as shown to open and close the integrated and adjustable air vent that provides a
natural air-flow environment for baby.
G - i) To fit apron, lock both press-studs to hood.
ii) For additional protection on windy days, unfold wind shield on the apron and attach
plastic pins into elastic loops on hood.
H - To fully lower the hood: Firstly pull slightly forward the hood and then squeeze on tabs on
the inside of tube of hood to unlock hood handle, then lower hood.
I - To lift or carry the carrycot, use hood handle integrated in hood.
Warning: First ensure that the hood is secured correctly into the carrycot.
Then make sure that the hood is locked upright by pulling it forward until it «clicks» into
locking position.
J - To stabilize the carrycot base pull out the four plastic feet located in the corners of the
carrycot base.
To enable the rocking feature push the four feet into the carrycot base.
K - To hide the brim of the hood, simply fold under and back.
L - TO FIT CARRYCOT: Place carrycot base on chassis attachment device “easylock”.
Lock will automatically engage.
Warning: Check that the pram body attachment devices are correctly engaged before
use.
M - TO REMOVE CARRYCOT: Squeeze the button on base of the carrycot and
simultaneously lift carrycot away from chassis frame.