7
ASSEMBLY / OPERATING INSTRUCTIONS
To fit Legs & Footrest Continued...
1
2
3
4
Locate the two rear upper legs.
Line up the screw and the hole and turn clockwise
until the leg is firm.
Do not over-tighten.
Repeat for opposite side.
The chair should resemble the image as shown.
Lay chair face down.
Align cross brace with upper legs, as per image
shown. Ensure silver nuts on cross brace are
facing you.
Screw one lower leg through cross brace and into
upper leg until firm.
Repeat for remaining three legs.
Ensure the feet sit flush to the floor surface before use of
the highchair.
1a.
1b.
1c.
1d.
2a.
3a.
3b.
3c.
3d.
4a.
