background image

2

             

             

Read all instructions before assembly and use of the cot. Keep instructions for future 

use.

ADULT ASSEMBLY REQUIRED:
DUE TO THE PRESENCE OF SMALL PARTS DURING ASSEMBLY, KEEP OUT OF REACH OF 

CHILDREN UNTIL ASSEMBLY IS COMPLETE.
TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE ADJUSTED TO THE 

LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
RECOMMENDED MATTRESS SIZE:
1300MM LONG X 690 MM WIDE X 100-150 MM THICK.
FOLLOW THE MANUFACTURER’S ASSEMBLY INSTRUCTIONS TO ENSURE THE SAFETY 

FEATURES OF THE COT ARE NOT COMPROMISED.

SAFETY PRECAUTIONS

WARNING

This cot has been manufactured for one child only, with a maximum weight of 

18kgs

 in cot configuration.

When the mattress base is assembled in the lower position, ensure the higher cot base holes are covered 

tightly with the filling bolts supplied. This is to prevent finger entrapment, swallowing and inhalation hazards.

ENSURE

 the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.

ENSURE

 the cot is completely assembled and check that all parts are securely tightened before placing the 

child into the cot.

ENSURE

 medication, string, elastic, small toys or small items such as money etc are always kept out of the 

child’s reach when in the cot.

DO NOT

 over tighten bolts/screws.

ENSURE

 that the child is clear of any moving parts when adjusting the cot.

For warranty purposes, keep your sales receipt to provide proof of purchase.

RECOMMENDED MATTRESS SIZE (SOLD SEPARATELY):

THIS COT HAS BEEN MANUFACTURED FOR USE WITH A MATTRESS WHICH MEASURES 

1300MM LONG BY 690 

MM WIDE AND 100-150 MM IN THICKNESS

The width and length are specified because it is important that the gaps between the mattress and the sides 

and ends of the cot will not exceed 40 mm when the mattress is pushed to one side or end, and 20mm when 

the mattress is centred in the cot. 
This is to minimise the risk of a child’s limb becoming caught in the gap. 
The thickness of the mattress has been specified to ensure that the depth of the cot is greater than 500 mm 

with the mattress base in the lower position and is greater than 300mm with the mattress base in the upper 

position, to minimise the risk of a child climbing or falling out of the cot.

Содержание Cloud 091600

















Отзывы: