Cosmetic face device Beautyrelax BR-2090 EMS HOT&COLD
User manual
16
NOTES ON THE USE OF THE DEVICE
1.
You don't have to use all the programs in one skin treatment. With regular use, you will
gradually learn how your skin reacts to the different programs. Always keep in mind the
importance of the different technologies - see the description of the technologies in the
introduction to this manual.
2.
When using the device, make sure that the application head is in full contact with your skin.
Otherwise, the effectiveness of the entire treatment will be reduced.
3.
When using a photon LED light, do not look directly at the light source. No safety glasses are
required to use the device. Just try to avoid looking directly at the light for a long time. This
protects your eyesight in the long run. The skin treatment intensity adjustment button does
not respond to a press, but to the sliding motion of your finger. Always start at the lowest
level #1. Increase gradually according to your feeling.
4.
Never cover the grilles on the sides of the unit. Natural air circulation must be maintained.
Otherwise, the unit will overheat and be damaged.
5.
For the EMS mode to work properly, it is necessary to increase the skin's conductivity with
Sonogel or another water-based cosmetic product. In general, substances without added
dyes or aromas that could irritate sensitive skin are preferable. You need to test which type
of product your skin tolerates best.
