6
7
2. Sapphire Disk (coarse)
A coarse-grained sapphire disk for filing and
treatment of thicker nails such as toenails.
• As with the find-grained disk, only the inner
sapphire disk rotates, enabling precise filing
of the nails without the risk of burning the
surrounding skin. Always work from the
outside of the nail to the tip.
3. Round Sapphire Grinder
Removes corns.
• When removing a layer of skin from the corn,
you will quickly penetrate deeper into the
skin and could injure the periosteum.
4. Needle-shaped Grinder
Remove dead skin.
• This is a precision tool, so proceed cautiously
when using this attachment. This attachment
frees ingrown nails and cuts away parts of
dead nails. Use only at low speed.
5. Mandrel
Holds sanding bands.
6. Sanding Band
Removes dry skin and foot calluses and treats
nails.
• Sanding bands can be removed and
discarded after a single use. Twenty single-
use sanding bands are included. To maintain
natural skin protection, do not completely
remove calluses.
7. Flame Milling Cutter
For removing ingrowing nails.
• Guide the flame milling cutter carefully onto
the treatment area and cut away the affected
nail part.
8. Cylindrical Milling Cutter
For grinding and smoothing thickly-grown
toenail surfaces.
• Apply the milling cutter horizontally to the
nail surface and remove the unwanted layer
of nail using slow circular movements. Apply
light pressure.
9. Hardened Skin Remover
For removing large-scale and thick hardened
skin or calluses on the soles and heels of the
feet.
• Guide the hardened skin remover attachment
over the parts of the sole and heel to be
treated. Exert gentle pressure. Note that it is
not recommended to remove too much skin
from calluses as this may cause them to grow
back much harder.