SDH-300
Description:
Function of the buttons:
Use button "3" to switch the headphones on or off.
Point "2" in the graphic above shows you the input for the charging label with which
you charge the headphone battery. If the battery is not charged, the indicator lights
up red. As soon as the battery is fully charged, the display changes to green. The
charging time is approximately 3 hours.
Knob 1: This switch sets the channel you want to receive.
There are 3 channels available.
CH-1: the headphone LED lights up BLUE
CH-2: the headphone LED lights up RED
CH-3: the headphone LED lights up green
With the control "4", which is shown in the picture above, you regulate the volume.
Pay attention to the volume! Hearing at a high-volume level can
permanently damage your hearing.
Maintenance
Your device does not require any special maintenance. However, in the event of a
malfunction, contact an approved service centre or the manufacturer
Cleaning
Use a lint-free and only slightly damp cloth for cleaning.
