Beast Hover-1 HY-X10 Скачать руководство пользователя

Страница: 21 / 28

CHARGING YOUR Hover-1 BEAST

BATTERY CARE / MAINTENANCE

CHARGING THE DEVICE

• Ensure that the charging port is clean and dry.

• Make sure that there is no dust, debris or dirt inside the port.

• Plug the charger into a grounded wall outlet.

• Connect the cable with the power supply (100V ~ 240V; 50, 60 Hz).

• Align and connect the 3-pin charging cable into the charging port

of the Hover-1 Beast. DO NOT FORCE OR BEND THE CHARGING

CABLE INTO THE CHARGING PORT, AS IT MAY CAUSE THE PRONGS TO

BEND OR BREAK.

• The charging indicator light should change to RED, indicating that

your device is now being charged.

• When the RED indicator light on your charger turns to GREEN, then

your device is fully charged.

• A full charge may take up to 2.5 hours.

• After fully charging your Hover-1 Beast, unplug the charger from

your device and from the power outlet.

BATTERY SPECIFICATIONS

Battery Type: Rechargeable lithium-ion battery

Charge Time: Up to 2.5 hours

Voltage: 36V

Initial Capacity: 4.3 AH

Working Temperature: 32°F - 104°F

Charging Temperature: 50°F - 77°F

Storage Time: 1 year

Storage Temperature: -4°F - 77°F

Storage Humidity: 5% - 95%

BATTERY MAINTENANCE

The lithium-ion battery is built into the device. Do not disassemble the

device to remove the battery or attempt to separate it from the

device.

• When charging the device, please use the enclosed 3-pin

charging cable or otherwise ensure that the battery charging

conditions are met.

• Do not connect or attach the device or the battery to a power

supply plug or directly to a car’s cigarette lighter.

• Do not place the device or batteries near a fire, or into direct sunlight.

Heating the device and/or the battery can cause additional heating,

breaking, or ignition of the battery inside the device.

• Do not continue charging the battery if it does not recharge within

the specified charging time. Doing so may cause the battery to

become hot, rupture, or ignite.

To preserve natural resources, please recycle or dispose of batteries

properly. This product contains lithium-ion batteries. Local, state, or

federal laws may prohibit disposal of lithium-ion batteries in ordinary

trash. Consult your local waste authority for information regarding

available recycling and/or disposal options.

• Do not attempt to modify, change, or replace your battery.

• Do not use your device if the battery begins to emit odor,

overheats, or begins to leak.

• Do not touch any leaking materials or breathe fumes emitted.

• Do not allow children and animals to touch the battery.

• The battery contains dangerous substances, do not open the

battery, or insert anything into the battery.

• Please only use the charger provided by Hover-1.

• Do not attempt to charge the device if the battery has discharge

or emits any substances. In that case, immediately distance yourself

from the battery in case of fire or explosion.

• Lithium-ion batteries are considered to be hazardous materials.

Please follow all local, state and federal laws in regards to recycling,

handling and disposing of Lithium-ion batteries.

Содержание Hover-1 HY-X10





























Результаты поиска

Содержание Hover-1 HY-X10

Отзывы:

Похожие инструкции для Hover-1 HY-X10

Бренды по названию

Популярные бренды

Beast Hover-1 HY-X10, Руководство по эксплуатации

Результаты поиска

Содержание Hover-1 HY-X10

Отзывы:

Похожие инструкции для Hover-1 HY-X10

Бренды по названию

Популярные бренды