6
English
•
Do not connect in series!
•
Current-free only when the plug is with
-
drawn!
4 Start-up
Take the product from the packaging and remove any packaging material. Connect
the plug to a suitable safety socket (outlet). The device is now ready for use. The
outlet strip has a total of three schuko sockets and also three USB sockets, which
can be switched on or off by the help of the on/off switch. The device has an On/
Off switch and three LED indicators. The LEDs indicate the following functions:
5 Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the de
-
vice to sudden changes in temperature or heavy vibration as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe national regulations and restrictions. Do not use the device
for purposes other than those described in the instructions. This product is not a
toy. Keep it out of the reach of children or mentally impaired persons. Any repair or
alteration to the device not carried out by the original supplier, will invalidate the
warranty or guarantee. The product may only be used by persons who have read
and understood these instructions. The device specifications may change without
any separate prior notice to this effect.
LED
Function
White
POWER LED
Red
•
Switched on: Overvoltage protection is enabled
•
Switched off: Overvoltage protection is not activated
Green
• Switched on: Grounded outlet
•
Swichted off: No grounded outlet
