11
English
5 Commissioning
Take the device out of the package and remove all the packaging material.
• Connect the night light to a properly installed socket.
•
Press the "White light" button to change the light to white.
•
To switch between the individual colours, press the "RGB light" button in quick
succession. The colour changes each time you press the button.
•
Press "RGB light" button for about 3 seconds to automatically enable col
-
our-changing function.
•
Choose between different levels of brightness by pressing the "Increase bright
-
ness" and "Reduce brightness" buttons.
Note:
You can adjust the sensitivity to light using the position of the sensor. The
sensitivity is higher if the sensor points upwards. The sensitivity is lower if the
sensor points downwards.
Caution!
6 Safety instructions and Disclaimer
Never try to open the device to repair or make modifications. Avoid contact with
the mains voltage. Do not short-circuit the product. The device is not waterproof,
hence please use it only in dry surroundings. Protect it from high humidity, water
and snow. Keep the device away from high temperatures.
Do not expose the device to sudden changes in temperature or strong vibrations,
as this could damage the electronic components. Check the device for any damage
before using it. The device should not be used if it was subject to impact or has
been damaged in some other manner. Please comply with the local regulations
and restrictions. Do not use the device for purposes other than those described
in the user manual.
This product is not a toy. Keep it out of the reach of children or mentally disabled
persons. Any repair or modifications to the device, which is not carried out by the
original supplier will void any warranty and guarantee claims. The device should
only be used by those who have read and understood this user manual. The speci
-
fications of the device may be changed without prior intimation.
