BearCreeks Navimate, Руководство пользователя

Страница: 5 / 18

4
Charging and battery maintenance
Notes:
Do not plug the battery into fish finder cable. The fish finder cable is
easily
identified by its ‘L’ shaped connection (right) and clear labelling
saying “POWER CABLE FOR THE FISH FINDER”.
• To ensure trouble-free charging, only use the chargers supplied by Atom.
• Please make sure that both the boat and handset are switched off while being charged.
• When you receive your Atom, fully charge all batteries.
• When the green light indicates your battery is charged, always remove batteries from the charger.
• First charge of a new battery to fully charged will take approximately 8 hours.
• Dry cell batteries (non-rechargeable) may be used in the handset.
Warning: Please do not attempt to charge the handset with non-chargeable batteries in use.
Charging the handset batteries
Charging the handset batteries with home charger
1 When the voltage of the handset is less than 4.2V, a buzzer will sound and the handset cannot be used
until charged.
2 Take the 4 batteries out of the handset and put them into the charger. Then plug the charger in.
The display will show ‘CHG’ and the icons will move constantly.
4 When the icons are full and stop moving, the batteries are fully charged. This will take around 7 hours
for discharged batteries.
5 There is also a discharge function on the charger. Insert the batteries, connect to power and press the
function key on the side of the charger for seconds. The display will change to DISCHG’. This will
normally not be needed.