3
Installation of the antenna and wiring
1)
Drill a hole (5mm diameter) on the selected position. Only in case the
hole is not yet there.
2)
Screw down the wisher and nut from the feeder cable, then hold the
cable through the hole from inner housing, and tighten the nut by a
wrench.
3) Screw the antenna on the boat.
4)
After the installation is finished, please connect the parts (transducer,
antenna, battery) to the CCU. Then fix the CCU on the inner side of
the boat.
Содержание BC131
Страница 1: ...BC131 Quick start guide...
Страница 7: ...6 Key Functions What is on the display...