BC MINI
Basic Operations Guide
Operations (Volume Range 0 ~ 7)
1. Press Up key for volume Up.
2. Press Down key for volume Down.
Indications
1. Beeps according to volume level.
2. Max./Min. tone beeps at the limit.
Operations
1. Press PF2 Key.
2. Up/Down to scroll the channels.
3. Wait for 2 sec. until beep tones sound.
(the channel is set when the beep tones
sound)
Indications
1. Channel Number is announced.
2. Yellow LED blinks a number of times for
the current channel #.
Operations
1. Press
PWR
key.
Indications
1. Light blue LED flashes the number of
times for battery levels:
LED Indicator
Battery Level
Blinks 3 Times
High
Blinks 2 Times
Medium
Blinks 1 Times
Low
Operations (Activate)
1. Hold
PF1
Key for 4 sec. to activate Super
Lock-P.
Indications
1. Single beep sounds.
Operations (Deactivate)
1. Turn the radio OFF, hold the
PF2
key and
turn the radio ON. Once Yellow LED
lights, release the
PF2
key.
2. Green LED stops blinking.
Operation (ON)
1. Press
PF1
key to enable SCAN.
Indications
1. Single beep sounds.
2. Green LED blinks while SCAN is ON.
Operation (OFF)
1. Press
PF1
key to disable SCAN.
Indications
1. Double beeps sound.
Operations (ON)
1. Hold
PF2
key for 1 sec. to turn on Monitor.
Indications
1. Single beep sounds.
Operations (OFF)
1. Hold
PF2
key for 1 sec. to turn off Monitor.
Indications
1. Double beeps sound.
Channel Scan
Volume Change
Channel Change
Super Lock-P
Battery Status
Monitor
Power Switch
Hold for 2 seconds to turn the radio power
ON and OFF. Momentarily press while the
radio is ON to see the Battery Level Guide.
PTT Switch
Press and hold, then speak into the
microphone to transmit.
LED Indicator
Indicate various status/functions of the radio. [RED]
Transmitting, [GREEN] Receiving a call, [Blinking BLUE]
Standby, [Blinking RED] Low Battery
Up / Down Keys
Press these keys to adjust the volume, change
the channel, and select options form the list in
the self-programming mode.
1
2
4
6
5
3
Voice Guide & Beep Tone
Notify various status/functions of the radio.
7
Function 1 Key
Press this key to activate/deactivate
channel scan. Hold for 2 seconds to
activate Super Lock-P function. Other
functions can be assigned from the
function list. [refer to PF Key Assignment]
Function Key 2
Hold this key for 2 seconds to stop / start
monitoring QT/DQT. Another function can be
assigned from the function list. [refer to PF Key
Assignment]
