- The large hole on the base allows you to see and align the bracket over the metal
threaded holes in the bottom of the bookcase.
12. You can then insert the mushroom bolt and tighten and secure using the Alan
key through the hole as seen pictured right (Picture 11)
Tip! Do not fully tighten the bolt initially to enable you to align the other holes,
once all bolts are aligned then fully tighten to secure the rotating component.
13. Rotate the base and hole round to the remaining threaded holes and secure
the bracket to the bottom of the bookcase.
14. Stand the bookcase up on its base and give it a check and test spin to ensure
its assembled securely and safely (Picture 12)
Please note!
We strongly advise you secure your bookcase to a skirting board or wall stud using
the wall brackets and wood screws provided (Picture 13)
Use the smaller (16mm) screws to secure the
bracket down into the base.
The longer (30mm) screws are used to secure
into skirting boards and or wall studs or
wall plugs.
We hope you enjoy your new Rotating Bookcase!
Ensure children using the rotating
bookcase are supervised at all times!
Bear Wood Furniture Ltd
Please refer to our ‘Usage & Safety’ document for additional guidance.
Contact us @bearwoodfurniture_ // [email protected]
