BEANAIR BeanDevice Wilow AX-3D, Быстрый старт, Страница: 14 / 15

27
Smart Sensor
For mode technical litterature, please visit our White Paper Page:
http://beanair.com/wireless-iot-sensors-white-paper.html
Please refer to the BeanDevice
®
2.4GHz Smart Sensors user manual section for more
information
https://www.wireless-iot.beanair.com/files/UM-RF-01-ENG-SmartSensor-
wireless-accelerometer-inclinometer-and-shock-sensor.pdf
For detailed information on the available Data Acquisition mode ,please refer to our
technical note
http://www.wireless-iot.beanair.com/files/TN-RF-008-Data-acquisition-modes-
available-on-the-BeanDevice.pdf
8. WHERE TO FIND MORE TECHNICAL INFORMATION ?
Facing technical problems ?
Contact our technical support team at :
tech-support@beanair.com
26
Smart Sensor
Download : Starts to download all the logs on the BeanDevice ® flash memory to your
computer
Download then erase : downloads all the logs and the erase them.
Cancel : Stops the download process
Stop DAQ, download then erase : stop recording data ,download the data logged
then erase it
Figure 24 : DataLogger memory configuration
Below, we can configure the datalogger when it’s full . Several choices are available:
“Stop DAQ” recording : Stop recording when the memory is full
“stop at end” recording : Data recording stops when the memory is full
“Stop DAQ DE”recording : Stop recording ,Download then erase the stored data