Beamz LS-1W RGB DMX, Инструкция по эксплуатации, Страница: 4 / 14

1.
Operating Instructions
DIPSWITCH CHART
FUNCTION
#1 #2 #3 #4 #5 #6 #7 #8 #9 #10
X X X X X X X X X x SOUND ACTIVE
1 X X X X X X X x x AUTO MODE
1
1 x x x x x x x x Animatiom
Sound control Auto working
Animation
1.1 Single user mode:
1.1.1 Use dip switch to set operating mode(See the table below
）
. Set
the operating mode according to clients
’
requirement: SOUND
ACTIVE or AUTO MODE.
1.1.2 Connect the power supply, and the lamp start to project laser light.
1.1.3 When in SOUND ACTIVE mode
，
adjust sound control sensitivity,
and adjust the sound control sensitivity knob according to the
surrounding
’
s sound strength. In the front panel when the blue
indicator flashes to indicate the sound activation, the system is in
sound active program; when in Auto mode, the system is in
Auto-working program.