Beamz Light Set 3-Some, Инструкция по эксплуатации

Страница: 9 / 28

INSTALLATION
This fixture has been designed to be hung. It is recommended for safety purposes, your lighting effect are properly mounted
using a suitable hanging clamp and safety cable. Items appropriate for safe and effective mounting are easily sourced from
your lighting vendor.
International laser safety regulations require that lasers must be operated in the fashion illustrated below, with a minimum of 3
meters of vertical separation between the floor and the lowest laser light vertically. Additionally, 2.5 meters of horizontal
separation is required between laser light and audience or other public spaces.

The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour
without any harming deformation.

The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This
secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main
attachment fails.

Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.

The operator has to make sure that safety-relating and machine-technical installations are approved by an expert before
taking into operation for the first time and after changes before taking into operation another time.

The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled person
once a year.

The fixture should be installed in the position where persons cannot reach and where persons may walk by or be
seated.
PRODUCT OVERVIEW

This device has left out premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe
operation, it is necessary for the user to follow the safety instructions and warning notes written in this manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any
unauthorized modification to the device.
CONTROL & FUNCTION

Regular breaks during operation are essential to maximize the life of this device as it is not designed for continual use.

Do not switch the unit on and off in short time intervals

Always unplug the unit when it is not used for a longer time. Or before replacing the bulb or start servicing.

In the event of serious operation problems, stop using the fixture and contact your dealer immediately.
Attention
Laser will be output from laser aperture in 5 seconds after the unit is powered on.