Beamz BWA63 ALUPAR, Быстрый старт, Страница: 2 / 4

Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present,
and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear
damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product
must be returned to the factory, it is important that the product be returned in the original factory box and packing.
If the unit has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation
water might damage your unit. Leave the unit switched off until it has reached room temperature.
On the label on the backside of the unit is indicated on this type of power supply must be connected. Check that the mains voltage corresponds to
this, all other voltages than specified, the light effect can be irreparably damaged. The product must also be directly connected to the mains and
may be used. No dimmer or adjustable power supply.
Always connect the unit to a protected circuit (circuit breaker or fuse). Make sure the unit has an appropriate electrical ground
to avoid the risk of electrocution or fire.
Units with protection class IP65 are dust-tight and completely protected against contact (first code number). They are also protected against
splash water from any angle (second code digit). That is why this unit can also be used out
‐
doors. Events units are generally only designed for
temporary use however (event lighting) and not for permanent use outdoors. The specified protection class does not make a statement about the
weather resistance of the units (resistance to changing ambient conditions as well as against the effects of sunlight and UV rays). The seals and
screw connections of the units must be checked regularly to ensure a fault-free operation.
Rated voltage : 100-240VAC, 50-60Hz, 0.8-0.5A
LED : 6x 3Watt 3-in-1 LED Red / Green / Blue
Beam angle : 23
°
Illuminance : 1300lx @1m
IP Class : IP65
Dimensions per unit : 100 x 120 x 140mm
Weight (per unit) : 0,95kg
Design and product specifications are subject to change without prior notice.
The products referred to in this manual conform to the European Community Directives to which they are subject:
• Low Voltage (LVD) 2014/35/EU
•
Electromagnetic Compatibility (EMC) 2014/30/EU
•
Restriction of Hazardous Substances (RoHS) 2011/65/EU