GB
WARNING
-
Read the instruction manual thoroughly prior to using the unit.
-
Keep this manual for future reference.
-
Keep out of the reach of children.
-
For indoor use only in dry rooms.
-
Do not block the fan or the bubble wheel.
-
Do not block the ventilation holes.
-
Use good quality bubble oil.
-
Do not use inflammable chemicals.
-
Do not use the unit at room temperatures of more than 40°C.
-
Switch the unit off before you refill the tank.
-
If the unit I fitted with an earthed plug, this must be connected to an earthed outlet.
-
The unit does not contain any user replaceable parts other than those specified in this
manual.
-
If the plug and/or mains lead are damaged, they need to be repaired by a qualified
technician.
-
During installation, make sure that nobody is standing in the mounting area.
-
The unit contains voltage carrying parts. Do NOT open the housing.
-
Unplug the unit from the mains prior to repairs or maintenance.
-
Never plug or unplug the unit with wet hands.
-
If the unit is damaged to an extent that you can see internal parts, do not plug the unit
into a mains outlet.
-
Only connect this unit to an earthed mains outlet of 220-240Vac/50Hz and 10-16A.
-
When you unplug the unit from the mains always pull the plug, never the lead.
-
In order to prevent dropping of the unit, a safety fastening needs to be installed. This
-
In order to avoid accidents in public premises, the local legal requirements and safety
regulations/warnings must be fulfilled.
Use
-
Place the unit on a flat, stable surface which must not be tilted more than 10° (see
drawing)
-
Fill the tank up to the marking with a good quality bubble fluid ( order nr.160.575).
-
Switch the unit on via the On/Off switch on the rear side.
-
Switch the unit off after use and unplug it from the mains if it will not be used for a long
period of time.
-
Rinse the unit regularly with clean water.
10
10
10
10
PLEASE DON'T FILL OVER THE LINE!
