Beamz 151.226, Руководство пользователя

Страница: 7 / 12

www.beamzlighting.com
AUTO / SOUND MODE
Auto Mode: There are 3 types of Auto Modes to choose from; Color Strobe, Color Dimmer Color Change, and both modes running
together. The running speed is adjustable in all 3 modes.
- Single Color Strobe (1Exx)
Single color strobe (running) effect , 1E00 = fast ~1E20 = slow
- Strobe (2Exx)
Strobe effect all LEDs strobe 2E00 = fast ~ 2E20 = slow
- Dimmer (1FXX – 7FXX)
1F=RED, 2F=GREEN, 3F=BLUE, 4F=WHITE, 5F= RED/WHITE, 6F=GREEN/BLUE/WHITE,
7F=RED/GREEN/BLUE/WHITE dimming 0-100%
- Color Change (1JXX)
Change color from RED to GREEN to BLUE to WHITE to RED etc. XX = speed
- Color Fade (2JXX)
Fade color from RED to GREEN to BLUE to WHITE to RED etc. XX = speed
- Sound Mode (1UXX)
1U = Single color, remain on last position when no sound
2U = Multi color LEDs go out when a while no sound
3U = LEDs remain on last position when no sound
4U = Random color LEDs go out when a while no sound
IR CONTROL
To switch off the lights:
Press OFF on the remote control. This will turn off all the lights until the button ON is
pressed again [1].
Manual Color Control
You can set R/G/B//W colours with the remote by pushing either the Red <R> button
for red, the Green <G> button for green, the Blue <B> button for blue, and the White
<W> button for white [3]. Each colour intensity is then adjustable using the Light Up
and Down [2] buttons
Preset colour mode:
Press one of the twelve preset colours on the remote control. [4]
AUTO/SOUND on the IRC.
Press one of the four program buttons to choose between the different auto programs.
Strobe is program 1E, Fade1 program 1J, Fade2 program 2J and Sound program
1
2
4
3
5