BEAMEX PGC, Инструкция по эксплуатации

Страница: 5 / 16

1
DESCRIPTION
Beamex
®
PG C calibration pressure pump is designed to manually generate be-
tween -0.95 to 35 bar (approx. -13.7 to 510 psi) of vacuum and pressure for quick
and accurate calibration of pressure gauges, transducers and other pressure meas-
urement instruments.
Standard Accessories
The standard accessory for a stand-alone pump is:

This manual
Additionally, for a pump kit:

Connector kit:
● G 1/8’’ male, 60° internal cone / G 1/8’’ male + o-ring
to replace a Hydrotechnics
®
connector in Beamex
®
MC6 Calibrator's
internal high pressure modules.
● G 1/8’’ male, 60° internal cone / G 1/4’’ B 2 seals.
An adapter for connecting the pressure measurement T-hose to
Beamex' high pressure EXT modules.
● G 1/8’’ male, 60° internal cone / G 1/4’’ NPT male.
An adapter for connecting the pressure measurement T-hose to
the instrument to be calibrated (DUT).

40 bar measurement T-hose.

Carrying case.
Optional Accessories
The optional accessories are as follows:

Service seal kit containing a set of seals and gaskets.
For details, see picture on page 7.

Fine adjustment valve including relief valve and gaskets.

Upper part of pump (cylinder) including pressure/vacuum selector.

Bottom part including handles and piston.