BEAMEX MC6-T, Руководство пользователя, Страница: 165 / 172

User Defined Function Data - 165
What Can be Done With Controller Communication
Ways of using an External Controller with MC6-T:
•
Controller (full use).
MC6-T uses the External Controller to set and measure the signal.
Controller can be taken into use in MC6-T's Port/Function list in MC6-
T's Temperature Calibrator , Calibrator , Documenting Calibrator
and
Data Logger
. See example in Figure 160: Pressure Port / Function
list with Controller and Measurement available . In Beamex CMX
Calibration Software , this corresponds to
Input Method
Controlled
and Measured .
• Measurement (only).
The External Controller acts like an external measuring device
(comparable to an External Pressure Module). This feature needs to be
activated in MC6-T's Controller Presets window. More of Controller
Presets window further on. When activated, Measurement is available
in Port/Function lists in MC6-T's Temperature Calibrator , Calibrator ,
Documenting Calibrator
and
Data Logger
. See Figure 160: Pressure
Port / Function list with Controller and Measurement available .
• Control (only).
MC6-T uses the External Controller to set calibration points. It is
measured by some other means, e.g. MC6-T's Pressure Module. This
is available in MC6-T's Documenting Calibrator only. See Figure 161:
Instrument input settings with Control (only) selected . In CMX, this
corresponds to Input Method Controlled.
Figure 160: Pressure Port / Function list with Controller and
Measurement available