Page 11 of 30
Getting Started
The
RST825
requires that a valid
Iridium
or
Telstra Mobile Satellite
SIM card to be
installed. This is not included in the
RST825
kit and you should consult your place of
purchase is you do not have an active SIM card enabled to make Iridium Satellite calls.
Warning:
To prevent possible damage, make sure the
RST825
system is
completely switched
OFF
before installation.
Tools required
•
Philips-head screwdriver
•
Allen Key (supplied)
Note:
Be careful to ensure that when you are removing or installing the
antenna or adaptor that the handsets power is turned
OFF
. The
handset should not be turned on until after the connector cable is
attached also.
Step 1:
Ensure the System is switched off.
Step 2:
Open the case lid.
Step 3:
Using a
Philips screw driver,
remove the black
steel cover plate.
Step 4:
Remove next
screw, and slide back
the cover.
Step 5:
Use the Allen
Key, and remove the
2 socket-head
screws, and insert
the SIM card.
(HINT:
carefully
using the hex-wrench
can help slide the
plastic SIM holder)
Step 6:
Replace and
re-fit all screws and
covers.
