1. Fitting the antenna to an attachment point with a 16mm
hole.
2.
Use the mounting bracket to clamp to horizontal or
vertical tubing.
3.
Attachment to a fixed support.
Screw or bolt the angled plate to a support/structure.
Connect the SAT cable running from the antenna to the SMA/TNC adapter.
Then connect the TNC adapter to the TNC connector on the loom coming from the
dock or the TNC Bulkhead at the rear of the terminal.
Connect the GPS cable running from the antenna to the SMA connector on the
loom coming from the dock or the SMA Bulkhead at the rear of the terminal.
Electrical Connection
Specifications
General Specifications
Finish
Weatherable Polymer Black
Weight
0.822kg (1.812lbs)
Length
78cm (30.73 inches)
Width
3.8cm (1.50 inches)
Operating Temp
-40°C to +85°C
(-40°F to 185° F)
Altitude
6,096m (20,000’)
Iridium Specifications
Frequency
1616 – 1626.5 MHz
Polarisation
Right Hand Circular
Axial Ratio
3dB max at bore sight
Impedance
50 ohms
VSWR
≤ 2.0:1
Power Handling
10 watts
Connector
TNC Male
Cable
Includes 5m (16.4’) of LMR240 Ultra Flex
GPS Specifications
Frequency
1575.42+/- 10MHz
Polarization
Right Hand Circular
Axial Ratio
3db Max at bore sight
Amplifier
Gain: 26 ± 2dB
Noise Figure: 2.5dB max
Impedance: 50 ohms
VSWR: < 2.0 : 1
Voltage: 3.3V DC (35mA)
Power Handling: 1 watt
Connector:
SMA Male
Cable
Includes 5m (16.4’) of RG316
Outside/Vehicle Installation Options
SMA Loom
GPS SMA connector
SMA Bulkhead
Terminal
or
Dock
GPS
TNC Loom
TNC Adapter
Satellite SMA Connector
TNC Bulkhead
SA
T
Terminal
or
Dock
