RST625 INSTALLATION & USER MANUAL
REV 03
19
3. Use
the
+
symbol for international calls
4. Once the number is entered Call?, will appear
5.
Press
OK
to attempt call
6. To end call if End Call? appears
press
OK
7.
To end call press
C
or replace handset in cradle
Refer to your Service Provider for calling Instructions:
If you make a mistake,
press
C
once to delete the last digit, or
press and hold
C
to clear all digits.
If the call connects and is answered,
Connected
appears on the display for a few
seconds, followed by
End Call? .
Automatic Redial
If the number or your network is busy, you will see Redial? for five seconds.
Press OK to redial the number automatically.
Note:
The maximum number of redial attempts is set by your service provider.
If the call cannot be connected within this maximum, you will see the message
Redial failed.
Redial Last Number Called
Whenever your phone is on standby, you can redial the last number called
1.
Press
OK
to display the last number dialed.
2.
Press
OK
again to place the call.
International Dialing
To make an international phone call:
1.
Press and hold *
After a few seconds the international dialing appears in the display.
This allows you to call from any country without knowing the local international
access code.
2. Enter the country code followed by the phone number. The country code
follows the conventional format.
Dial a Number from the Phone Book
Your phone contains a phone book that you can use to store names and telephone
numbers. Once you have stored information in your phone book, you can save
dialing steps by using:
•
one-touch
dialing
•
an entry from a location
•
an entry of a name
•
one of the last ten numbers called
Make an Emergency Call
