background image

Cover

back cover

Beam Brush 

Pearl

Setup Guide

Please read before use of product.

Beam toothbrushes are safe when used within the safety 

guidelines. Beam toothbrushes are an electrical appliance 

and should be handled cautiously especially around children.

Dangers

To lessen the risk of injury or fire:
1.  Do not use any power source other than the provided 

AC/DC adapter.

2.  Do not store the charger near bathtubs, toilets, and sinks.
3.  Do not attempt to grab or use a charger if it has fallen 

into the water. Unplug from the outlet immediately.

4.  Do not use the brush while bathing.
5.  Do not attempt to clean the charger while plugged into 

an electrical source.

6.  Do not attempt to plug the charger into any other  

voltage other than specifically stated on the product. 

7.  Do not forcefully plug the charger into the outlet.
8.  Do not use a charger if the plug does not easily fit  

into the outlet.

9.  Do not attempt to take apart the charger.

How to remove and recycle the battery

Please note: This process will fully disable the product  

and will not be able to be undone. The steps to remove  

the battery from the brush are listed below.

Steps to remove battery

1.  Before you start the removal process please make  

sure that the brush has no charge left and the battery  

is completely drained. You can accomplish this by  

turning the brush on and letting it cycle. Repeat until  

the battery is drained.

2.  Once you have made sure that the battery has been fully 

drained and the brush has no power you will need to 

remove the battery from the brush. For this you will need 

a screwdriver and channel locks.

3.  Take the channel locks and place it 1/4 inch away from 

the bottom of the brush approximately where the beam 

logo is on the front and proceed to apply pressure with 

the channel locks. Rotate brush 90° and apply pressure, 

repeat until cap can be removed. 

4.  Once the cap is off, then proceed to take the screw  

driver and pull back on 2 locking tabs inside the bottom 

of the brush.

5.  Take off the brush head and proceed to turn the cap 

upside down and press it against a table to be able to 

remove the carrier from the handle. The carrier houses 

the motor, circuit board, and the battery.

6.  Once the carrier is free please push the battery from the 

back and pop the battery out of the carrier. Twist the 

battery wires until the wires come loose from the circuit 

board, watch to make sure the positive and negative 

wires do not come in contact with one another. Once the 

battery is free it needs to be properly recycled please 

read below to learn the proper way to recycle the battery.

How to properly recycle the battery

These batteries can not be thrown away since they contain 

harmful materials that can be a hazard to the environment.  

To recycle the battery it will need to be disposed of at your 

local waste management facility. For more information please 

ask your local waste management facility for information on 

how to dispose of the battery.

Caution

To lessen the risk of injury or fire:
1.  If the brush or charger appears to be damaged in any 

way, please discontinue use of the product. As further 

use could result in injury.

2.  If the brush is damaged and can no longer be used the 

battery must be removed from the product before it is 

discarded. Do not attempt to remove the battery if the 

brush is not ready to be discarded. Please refer to the 

battery disassembly below for more information on how 

to remove the battery.

3.  Once the battery has been removed please discard safely.
4.  The Beam toothbrush has been specifically designed to 

clean teeth, gums, and tongue. Do not attempt to use this 

product in any other way than as previously described.

5.  Do not store brush or charger near a heat source.
6.  Beam toothbrush is NOT dishwasher safe. Do not attempt 

to wash this product in the dishwasher.

7.  Please refrain from storing or using this product outdoors.
8.  Supervision is required for children or people with reduced 

physical, sensory, or mental capabilities to safely use this 

product. Without these specific supervision requirements 

this product could lead to injury.

9.  The Beam toothbrush contains a battery that is  

non-replaceable.  

Medical Caution

If you have received any injuries from this product please 

consult your dental professional.

Important 

Precautions

Содержание Pearl







Отзывы: