Beam Oceana 400, Руководство пользователя

Страница: 22 / 31

Terra400 & Oceana400 - Installation & User Manual 23
Operation
Registration
1. Turn ON power to the terminal. The
Signal LED will start flashing RED.
2. Wait for the terminal to acquire GPS lock
and register to the Inmarsat network.
This may take up to 2 minutes.
3. The Signal LED will then be solid GREEN or
YELLOW and the terminal is ready for calls.
NOTE
If your SIM has the PIN enabled, see section “SIM PIN
use” page 22, to enter PIN, or to permanently disable
PIN. The terminal will not register if PIN is required.
Prepay Subscription Balance
If you have a prepay subscription, your
service provider will have informed you of the
services available to you.
Contact your service provider for details of
the dedicated phone number which enables
you to make a balance enquiry and redeem
prepay vouchers.
Oceana 400
Terra 400
1 2 3
Terra 400 & Oceana 400 LED Status
1. Signal LED
2. Call LED
3. MSG LED
Terra 400 & Oceana 400 LED Status Table
All LED status lists below exclude error states.
SIGNAL LED GREEN RED YELLOW
ON Good signal
Registered
No signal
Registered Poor signal
Registered
FLASHING Good signal
Not registered
No Signal
Not registered
Poor signal
Not registered
ALTERNATING Alternating GREEN, YELLOW, RED.
Error state entered. The Call and Message LED’s indicate the error code.
MESSAGE LED GREEN RED YELLOW
ON N/A N/A N/A
FLASHING Voice mail has been
received
SMS is present in
the inbox
Both a voice mail and
inbound SMS has
been received
ALTERNATING N/A N/A N/A
CALL LED GREEN RED YELLOW
ON POTS off-hook N/A DTR present on data
port
FLASHING POTS call in
progress
N/A Data call in progress
(DCD active)
ALTERNATING N/A N/A N/A