22
LOCATION
BUTTON MODE
ACTION
LED/SOUND
Single Press
1.5 sec
(until 1 beep
sounds)
Bluetooth® function
is ON:
Turns OFF Bluetooth®
function
LED turns
OFF
Single Press
5 sec
(until 2 beep
sounds)
Bluetooth® function
is ON:
Bluetooth® is set to
discovery mode for
pairing to Bluetooth®
devices
LED is FAST
FLASHING
ORANGE
and BLUE,
and then
turns solid
BLUE when
paired and
connected.
Single Press
10sec
(until 3 beep
sound)
Bluetooth® is ON
or OFF:
Clear all
paired Bluetooth®
devices and turn off
Bluetooth® function
LED turns
OFF
Single Press
(until 1 beep
sounds)
In Tracking Mode*:
Send a tracking
message to the
pre-configured
destination in the
Extreme Handset
LED flashes
GREEN for 5
seconds.
A beep will
sound to
indicate that
a tracking
message is to
be sent#
Single Press
5sec
(until 2 beeps
sound)
Enables / Disables
Track button
LED Solid
GREEN is
enabled,
LED OFF is
disabled
* This action is optional, and only when tracking for your
Extreme Handset is configured and activated. Using the
Track button only initiates the command to send a Quick
GPS message - check that the Extreme Handset is configured
correctly.
# A beep will only sound if audible alerts are enabled in Eagle.
DriveDOCK Extreme Button Action & Response
(PTT Mode)
DriveDOCK Extreme Button Action & Response
(Phone Mode) continued...
LOCATION
BUTTON MODE
ACTION
LED/SOUND
3 Second Press
Cycle through
audio speaker and
mirophone options
• PTT/Privacy
Handset
• PTT/Privacy
Handset and
handsfree
speaker
• Handsfree
speaker and
microphone
3 rising beep
sounds
OR
Up/Down
Increase/decrease
volume on the
audio device in use
Audio will sound
louder/softer with
each press.
