30
been damaged—for example, if the Wireless Handset is cracked,
punctured, or damaged by water.
Connectors and Press Buttons:
Never force a connector into a port or apply excessive pressure
to a button, because this may cause damage that is not
covered under the warranty. If the connector and port don’t
join with reasonable ease, they probably don’t match. Check
for obstructions and make sure that the connector matches
the port and that you have positioned the connector correctly
in relation to the port. Not all Hirose 6 pin accessories are
fully compatible with Wireless PTT Handsets. Under some
conditions, certain accessories may affect Wireless PTT Handset
performance. Reorienting or relocating the handset and the
connected accessory may improve wireless performance.
Connect your BEAM Reseller for advice.
Acceptable Temperature Extremes:
The Wireless PTT Handset is designed to be normally operated
and stored in temperatures between -20ºC and 50ºC (-4º to
122ºF). Lower or higher temperature conditions might shorten
battery life or cause the handset to temporarily stop working
correctly. Leaving Wireless Handset in a parked vehicle or in
direct sunlight can cause handset to exceed these storage
or operating temperature ranges. Avoid rapid changes
in temperature or humidity when using the handset, as
condensation may form within the unit. When you’re using the
Wireless Handset or charging the battery, it is normal for Wireless
Handset to get warm. The battery will only charge when its
ambient temperature is within its safe limits of 0ºC - 45ºC.
Specifications
Wireless PTT Handset
BEAM Wireless PTT Handset has been designed to meet the
following global specifications:
Dimensions -
Wireless PTT
Handset
88 x 28 x 63
(mm)
3.46 x 1.1 x2.48
(inches)
Weight - Wireless
PTT Handset
0.149 kg
5.25 oz
Dimensions - PTT
Charging Cradle
80 x 80 x 60
(mm)
3.15 x 3.15 x 2.36
(inches)
Weight -PTT
Charging Cradle
0.125 kg
4.4 oz
Operating
Temperature
-20ºC to +50ºC
-4ºF to +122ºF
Frequency
2.40-2.48GHz FH Spread Spectrum
Protocol
802.15.4 based derivative
RF Power
<100mW
Battery Type
3.7V @1200mA Lithium Ion
Battery Life
>12 Hours @ 30% receive time
Encryption
SAFER+ 64Bit std/ 128Bit Advanced
model
RF Connectors
RP SMA Female
Audio/Distortion
>250mW @5% THD
Hirose Audio Port
Industry standard - Hirose HR10-7R-6S
accessory port
Audio Port
Standard 3.5mm mono jack (TS)
Power Input Voltage
6-16VDC (supplied by Extreme Dock)
Vibration and Shock
Mil Std 810 C/D/E/F
Humidity/Rain/Dust
IEC529, IP55 (Wireless Handset only)
Type Acceptance
Aust/NZ, FCC, CE Compliance, Industry
Canada