TWINOVA
Twinova function splits the keyboard into two
areas with the same sound and octave range,
for the convenience of playing together with
a friend or an instructor.
Turn Twinova on or off.
Press and hold the
[SHIFT] button, then
press the key
[C#6] to turn Twinova on
or off. The split point is E4/F4.
Select a sound for Twinova.
The upper sound selected before entering
Twinova will become the default sound for
both areas. But you can press the sound
buttons to select a desired sound.
Note:
The Twinova mode and layer / split
functions cannot be used at the same
time. During song playback, Twinova
mode is not selectable.
PIANO PARAMETERS
Piano Parameters
1. Press and hold the [SHIFT] button,
then use the keyboard to turn the
piano parameters on or off, or set
the corresponding effect depth.
Piano Parameters (String Resonance,
Damper Resonance, Damper Noise,
Hammer Noise, Lid) apply to Piano Sound
no.1 to no.4 only. These parameters are
not available when using other sounds.
2. When a piano parameter is turned on,
it will revert to the previously set level.
3. When a piano parameter is turned off,
pressing the corresponding
[-] key will not
respond. But the effect depth will increase
from 1 (except the Lid depth which will
change from 2/4 Open to Full Open) when
you press the corresponding
[+] key.
PLAYING METRONOME / RHYTHMS
Press the
[MODE] button to select
Metronome mode. The corresponding
mode LED lights up. The instrument will
enter Metronome mode by default every
time the power is turned on.
1. Start playing Metronome/Rhythms.
In Metronome mode, press the
[START/STOP]
button to start playing metronome/rhythms.
The
[START/STOP] button LED will blink
according to the metronome/rhythm tempo.
2. Select a metronome/rhythm pattern.
Press the
[<] [>] button to select a desired
metronome/rhythm pattern.
PLAYING SONGS
Press the
[MODE] button to select Song
mode. The corresponding mode LED
lights up.
1. Start playing a song
In Song mode, press the
[START/STOP]
button to start playing a song. The
[START/
STOP] button LED will blink according to
the song tempo.
2. Select a Song
Press the
[<] [>] button to select a
desired song.
Press and hold the
[<] or [>] button to
quickly jump to the nearest eleventh.
For example, if the currently song is No.1,
long press the
[>] button and it will quickly
select No.11.
Alternatively, press and hold the
[SHIFT]
button, then use the keys
[C3 - A3] to enter
a song number. When using the keyboard
to enter a number, you always need to press
three keys total. For example, press
A3, A3,
C3 (001) in sequence to select Song no.1.
(Refer to
Song List for details)
3. Stop playing the song.
When a song is playing, press the
[START/
STOP] button to stop the playback.
Alternatively, press the
[MODE] button to
enter other modes. The song playback will
be stopped.
Press and hold the
[<] or [>] button to quickly
jump to the nearest eleventh. For example,
if the current pattern is No.5, long press the
[>] button and it will quickly select No.11.
Alternatively, press and hold the
[SHIFT]
button, then use the keys
[C3 - A3] to enter
a metronome/rhythm pattern number.
When using the keyboard to enter a number,
you will need to press two keys total.
For example, press A3, C3 in sequence to
select Metronome/Rhythm no.1. (Refer
to
Metronome/Rhythm List for details)
3. Stop playing Metronome/Rhythm. When
metronome/rhythm is playing, press the
[START/STOP] button to stop the playback.
Alternatively, press the
[MODE] button to
move to Song mode. Metronome/rhythm
playback will be stopped.
