Beale Xpress IA-1250, Руководство пользователя

Страница: 19 / 32

19
REMOTE BYPASS
The Remote Bypass switch allows/prevents IR and
RS232 control by zone. When the switch is in the ON
position (bypass zone) the zone will not respond to IR
or RS232 commands. When the switch is in the OFF
position, (do not bypass zone) the zone will respond
to IR and RS232 commands.
1. Remote Bypass - Set to ON position to block
IR and RS232 commands from controlling the
selected zone. Set to OFF position to allow IR and
RS232 control of the selected zone.
VOLTAGE SELECT/FUSE
This switch sets the voltage to the AC Mains. Be sure
to check AC voltage at the geographic location where
the IA-1250 will be installed.
1. Voltage Select - Set as appropriate for
geographic location. NEVER CHANGE THIS
SWITCH SETTING WHILE THE IA-1250 IS
CONNECTED TO AC POWER!
2. Fuse- Confirm that the proper fuse is
installed for the selected AC Voltage. If set to
220V-240V/50Hz use a T5.0AL/250V fuse. If set
to 110V-120V/60Hz use a T10.0AL/250V fuse.
Settings
Remote Bypass Switch
AV Voltage Select/Fuse