Beadalon Jewel Loom, Инструкция пользователя

Страница: 4 / 20

4
E N G L I S H
Finished warp threads.
9
Carefully remove metal rod.
10
Note: When determining the length of your band, keep in mind that
the clasp will add approximately 1 inch. Therefore, if your wrist
measures 6 inches then build your base 5 ½ inches. The extra inch
from the clasp will make it hang correctly on your wrist. You can
adjust this according to your desire of fit.
Step 3 - Adding Bead Base
Bring Needle over the first warp
thread and repeat under over
process until you weave needle
back to left side of loom.
2
Cut a piece of thread 2 yards long
and thread it through needle.
Working from Left to Right, start
by weaving needle under first
warp thread and then over second
warp thread, repeat the under
over process until you go all the
way through to the last warp
thread.
1
Bring needle and thread under
all warp threads and out to right
side of loom. Pick up 6 Size 8/0
seed beads and slide to the end of
the thread.
3