Beacon Lighting 531016, Инструкция по установке и эксплуатации

Страница: 8 / 72

Bayside Megara Fan Installation Instructions
FINISHING THE INSTALLATION
•
Ensure the earth wiring is secure and correct, by performing an earthing continuity test from the fan’s
accessible metal body back to the earth terminal at the terminal block on the mounting bracket.
•
Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy
and that the wires are not damaged during this step. Secure the canopy to the mounting bracket
using the screws provided. (Fig. 8)
•
Switch ON mains power supply to the fan. Test the fan operations or enjoy using the fan following
instructions the under “USING YOUR CEILING FAN” section of this instruction manual.
USING YOUR CEILING FAN
REMOTE CONTROL (Fig. 9)
Your ceiling fan is controlled by the remote control. Before operating the remote, the following must be
considered.
-
1x CR2032 3V battery is required to operate the remote control.
-
Remove the screw (6) and pull out the battery tray (2) by pressing the clip (1) and pulling out the
battery tray together.
-
Place the battery (3) on the tray and insert the tray back into remote handset (4) indicated by “+”
polarity symbol (5).
-
Ensure the polarity is correct as shown in the battery compartment.
-
Reinstall the screw (6) to secure the battery tray (2).
Fig. 8
Fig. 9