Quick Setup Guide
1) Ensure the POWER switch is set to OFF before you begin.
2) Install a fresh alkaline or lithium battery in the adapter.
3) Mount the DXA-CONNECT adapter to the camera hot shoe.
4) Connect the supplied output cable from the OUT jack on the
adapter to the MIC input jack on the camera.
5) Set the camera gain to between the lowest setting and 25% of
maximum.
6) Connect your microphones or other audio sources to the adapter
XLR inputs.
7) Set the GAIN switches to +20dB.
8) Set the PH switches to ON only for condenser type mics that
require phantom power to operate. DO NOT activate phantom
power when attaching wireless microphones!
9) Set the PH VOLTAGE switch as follows:
a. OFF if no phantom is being used on either channel
b. 48V if either channel requires 48 volt phantom
c. 12V if the mics can operate on 12 volts to save on battery
power
10) Set the M/S switch to M for mono when using one channel or to S
for stereo when using two channels.
2