background image

Filter Mode

The filter mode 

screen

 will help you set up your ideal filtration and heating settings. Choose, set 

or modify one of the 5 suggested modes depending on your needs at any given time.

Away from home

In this mode the 

hot tub will 

alwayss

be in 

economy; the set 

point will be 

reduced by 20° F.

Energy

 Savings

The

 

hot tub

 will be in 

economy mode during 

the peak hours of the 

day and resume 

normal mode on 

the weekend.

S

uper

 Energy

The 

hot tub

 will 

always be in 

economy mode 

during peak hours, 

every day of the 

week.

modifying filter mode schedules

*

economy

Touch the Economy tab to change the 

economy schedule. You can add 

economy schedules by touching the 

orange line labeled "Add Economy" .
To delete a schedule, touch the 

garbage can icon at the right end of 

the desired line.

You can modify the programmed 

schedules by selecting one and 

adjusting the schedule.
You have several possibilities for the 

schedule (Mon-Fri, weekend, every 

day, or single days). The schedules 

will be repeated every week. The 

time and duration are set in 30 

minute increments.

filter cycles

Touch the Filter cycle tab to change 

the filter cycle schedules. You can add 

filtration schedules by touching the 

orange line labelled "Add filter cycle" .
To delete a schedule, touch the 

garbage can icon at the right end of 

the desired line.

Once you have set the schedule, 

press "Confirm".  If you don't want to 

keep any changes, press 

"Cancel" or use the calendar icon to 

go back.

Weekender

D

efault 

S

ettings

You can reset all Filter Modes back 

to original factory settings by 

pressing "Default Settings".

Press "Confirm" to reset. Press 

"Cancel" if you choose not to reset.

filter mode

To

 

modify a Filter mode category, touch 

the pen icon at the right end of the 

desired  water care  to  open  the 

selected Water Care menu.
Note: The default Filter Mode for Hot

 

tubs equipped with a Hush pump is

 

"Standard-Beginner" and is

 

programmed 

to filter 24 hours (2 x

 

12hr) 

per day.

The 

hot tub

 will 

be in economy 

mode from 

Monday to Friday, 

and will run 

normally on the 

weekend.

*In economy mode, the set point

will 

be reduced by 20°F

 - which

means the 

heating system will not

be

 

engaged unless the temperature

falls to 20°F below the 

hot tub's

 set

temperature.

Standard-Beginne

r

(default filter mode)

The hot tub will 

never 

be in economy mode 

and will be filtering 

according 

to the management 

system's low level 

configuration.  

1st filter cycle @ 8:00am

2nd filter cycle @ 8:00pm

3

Содержание ET-1000









Отзывы: