Beaba 912866, Инструкция по эксплуатации

Страница: 15 / 104

14 15
9. Never use water from the bain-marie mode to prepare a bottle.
10. Empty the heating unit and wipe it with a clean cloth or a paper towel before
storing your appliance.
In Bain Marie mode, the heating unit may be used without the arch support
1. To remove the heating unit#2 from the support, unlock the lock switch by
turning it anti-clockwise.
2. Place the heating unit#2 on a flat surface and then follow Bain Marie
instructions.
water temperature Heating Time *
Final temperature of
bottle **
Bain-marie
70 °C 7 to 8 min 30 - 40 °C
Bain-marie
90 °C 11 to 12 min 30 - 40 °C
* Heating time will depend of initial water temperature
MAINTENANCE
• Always unplug the appliance before cleaning it.
• Clean the tank and surfaces with a damp cloth or sponge. Wipe carefully.
• Over time, limescale deposits may accumulate on the bottom of the tank,
descale the unit as below:
1. Remove the tank from its arch support
2. When the appliance is cold and unplugged, pour in a mixture of 50 ml of
water and 50 ml of white vinegar or BEABA cleaning solution. Leave overnight.
Never use a chemical or a coffee machine de-scaler in the unit.
3. Empty the contents of the heating unit and wipe it with a clean cloth.
4. Repeat the operation if necessary until complete removal of the limescale.
5. Complete a (
) cycle with clear water before using again.
6. For storage you can unlock and remove the heating unit and place it inside
arch support (9)
9
SPECIFICATIONS
Voltage: 220-240V ~ 50Hz- 60Hz. Power: 460W - 540W. Temperature for use:
10 to 40°C.
ENVIRONMENT AND RECYCLING
You bought a product with this logo, do not throw this product away with ordinary
household waste. Enquire about the rules in effect in your region concerning
the selective collection of electric and electronic appliances. please contact your
local authorities in case you need more information on the collection points in
your area.
TROUBLE SHOOTING
The product does not
work
• Check that the power cord is not damaged.
• Check that the appliance is connected to a 220V –
240V electricity supply
All the buttons are
flashing
• The appliance is in default mode
• There is no water in the unit when starting the cycle
• Or contact Beaba’s after-sales service
All the water flows
before cycle is starting.
• Check that water distribution lever is not blocked
and pull it up.
• Check that limescale deposits are not preventing
the appliance from functioning
The water is not hot
enough
• Check that limescale deposits are not preventing
the appliance from functioning.
• Or contact Beaba’s after-sales service
Only one button is
functioning
• contact Beaba’s after-sales service
A long beep is hearing
• A cycle has been launched without water inside the
tank. Wait a few minutes before adding water.