BEA VIO-D Скачать руководство пользователя страница 1

VIO-DT 1&2

1

2

3
4

8

5

6

7

TECHNICAL SPECIFICATIONS

1. 

cover 

2. 

radar antenna 

(wide field)

3. 

radar field size adjustment

4. 

IR-prism (2 m)

DESCRIPTION

Presence
Typical response time: <256 ms
Active infrared with background analysis
Spot diameter: 0.1 m (typ)
Number of spots: 24
Number of curtains: 2
From -4 ° to +4 ° (adjustable)
Solid-state-relay 
(free of potential, free of polarity)
Max. contact current: 100 mA
Max. contact voltage: 42 V AC/DC
0.3 s to 1 s (not adjustable)
Typical: < 5 ms

ENGLISH

OPENING & SAFETY SENSOR 

FOR AUTOMATIC SLIDING DOORS

5. 

main connector

6. 

IR-angle adjustment

7. 

push button for setup or DIP-setting confirmation

8. 

DIP-switch

12 V - 30 V DC -5%/+10% 

(to be operated from SELV compatible power supplies only)

< 2.2 W
1.8 m to 3 m
< 1 V : Log. L; > 10 V: Log. H (max. 30 V)
-25 °C to +55 °C
IP54
< 70 dB
20 years

EN 300 440; EN 301 489-1; EN 301 489-3; EN 62311; EN ISO 13849-1 

Performance level «c» 

CAT2 

(under the condition that the door control system monitors the sensor at least once per door cycle); 

EN 61508 

(SIL2)

; EN 

61496-1 

(ESPE Type 2) 

; EN 12978; EN 16005

Supply voltage:
Power consumption:
Mounting height:
Sensitivity of the test input:
Temperature range:
Degree of protection:
Noise:
Expected lifetime:
Conformity:

Motion
Min. detection speed: 5 cm/s
Microwave doppler radar
Transmitter frequency: 24.150 GHz
Transmitter radiated power: < 20 dBm EIRP
Transmitter power density: < 5 mW/cm2
From 15 ° to 50 ° vertical (adjustable)
Solid-state-relay 
(free of potential, free of polarity)
Max. contact current: 100 mA
Max. contact voltage: 42 V AC/DC
0.5 s

Detection mode:

Technology:

Angle:
Output:

Hold time output signal:
Response time on test request:

VIO-DT1: energy-saving unidirectional sensor 
VIO-DT2: bidirectional sensor

User’s Guide for product version 0200 and higher
See product label for serial number

Specifications are subject to changes without prior notice. All values measured in specific conditions.

GREEN
LED

RED
LED

The VIO-DT 1&2 are opening and safety sensors for automatic sliding doors. They combine a motion radar sensor for opening 
the door with a double failsafe active infrared curtain for the protection of users.

 

Содержание VIO-D

Страница 1: ...sor at least once per door cycle EN 61508 SIL2 EN 61496 1 ESPE Type 2 EN 12978 EN 16005 Supply voltage Power consumption Mounting height Sensitivity of the test input Temperature range Degree of protection Noise Expected lifetime Conformity Motion Min detection speed 5 cm s Microwave doppler radar Transmitter frequency 24 150 GHz Transmitter radiated power 20 dBm EIRP Transmitter power density 5 m...

Страница 2: ...ition of IR curtains with Spotfinder and adjust if necessary ANGLE Detection field width indicated according to conditions defined in EN 16005 and including dimension of test body CA Available as accessory INFRARED FIELD SAFETY WIDTH H W 2 20 m 2 30 m 2 50 m 2 55 m 3 00 m 2 80 m H W 2 20 m 1 20 m 2 50 m 1 40 m 3 00 m 1 60 m in standard presetting GREEN BROWN YELLOW WHITE PINK GREY RED2 BLUE2 POWER...

Страница 3: ...ions PRESETTINGS ENVIRONMENT RELAY R1 ACTIVATION SAFETY INSTRUCTIONS TIP Launch an ASSISTED SETUP to verify wiring position of the curtains and correct functioning of the sensor SETTINGS by DIP switch QUICK SETUP ASSISTED SETUP SETUP Step outside of the infrared field before launching a setup LONG 3s SHORT standard critical environment shopping street1 hospital2 standard extreme3 1 Can only be use...

Страница 4: ...The sensor encounters a memory problem The sensor vibrates The sensor sees the door during the assisted setup The sensor sees the door The sensor is disturbed by lamps or another sensor The sensor is disturbed by the rain The sensor is disturbed by rain and or leaves The sensor vibrates Ghosting The sensor sees the door or other moving objects Check power supply Check wiring Use the 1 m prism if p...

Отзывы: