Page 2 of 4
75.5835.04 FALCON FAMILY 20160301
1
1
2
3
2
COM
NO
NC
12-24 V
AC-DC
1
2
3
0-9
1-6
15°
30°
45°
+45°
XL
Position the sensor on the
bracket and fasten the screws
firmly.
FALCON
Mounting height:
16 ft
FALCON WIDE
Mounting height:
11.5 ft
FALCON XL
Mounting height:
8 ft
MOUNTING & WIRING
Adjust the angle of the sensor to position the detection field.
Remove the bracket
from the sensor.
Drill 2 holes accordingly.
Mount the bracket firmly.
Connect the wires to the door
controller. Choose between NO
and NC contact.
DETECTION FIELD ADJUSTMENTS
DETECTION FILTER
(REJECTION MODE)
Adjust the field size with the
remote control or the push
buttons.
All detection field dimensions were measured in optimal conditions and with field size value 9.
CEILING
WALL
Choose the right detection filter for your application with the remote control or the push buttons:
Value recommendations according to angle and height:
Detection of all targets
(pedestrians and parallel traffic are detected)
1 = no specific filter
2 = filter against disturbances
(recommended in case of vibrations, rain etc.)
Detection only of vehicles moving towards the sensor*
(pedestrians and parallel traffic are not de disturbances are filtered)
* The vehicle detection filter increases the response time of the sensor.
Always check if the chosen
value is optimal for the
application.
The object size and nature
can influence the detection.
RED
BLACK
WHITE
GREEN
YELLOW
23 ft - 11.5 ft 8 ft
3 3
4 4
5 4
6 5
