BE I2500, Руководство по эксплуатации

Страница: 26 / 44

26
oil filter
maintenance
Engine Oil Replacement
1. Place the machine on a level surface and warm up the engine for
several minutes. Then stop the engine and turn the fuel cock knob to
“OFF””. Turn the fuel tank cap air vent knob clockwise.
2. Loosen the screw and remove the cover.
3. Remove the oil filler cap.
4. Place an oil pan under the engine. Tilt the generator to drain the oil
completely.
5. Replace the generator on a level surface.
6. Add engine oil to the upper level.
7. Install the oil filler cap
8. Install the cover and tighten the screw
· Recommended engine oil: (see page 12)
API Service “ SJ”
Temperature
o
C Time for Changing Oil (hr) Recommended Power Factor
25 Normal 100%
30 18 95%
35 15 85%
40 12 70%
CAUTION
· Be sure no foreign material enters the crankcase.
· Do not tilt the generator when adding engine oil. This could result in
overfilling and damage to the engine
· Clean the oil filter every other 100hr.
Oil Filter
I2500_3500 Inverter Generator Manual_2011.indd 26 18/10/2011 2:03:53 PM