SMART SAFE 3001D-1HL/3HL/5HL
SMART SAFE 3001D 1HL/3HL/5HL
10-11
NOTICE
If you key in a wrong digit, you can press
*
to clear the display and re-key in the right digit again.
NOTICE
For the public area, double press
*
before input the secret code, the safe will turn into Security Mode. It
means that the LED screen will not display the code numbers. The sign
“-”
will be instead of the code
number.
NOTICE
If someone input the wrong password for more than 5 times, the keypad will locked and the LED screen will
show
HOLd
. The keypad will be available again after 5 minutes.
USING THE MECHANICAL KEY
In case of accidental forget the owner code and the service code; you can open the safe by the mechanical
key, proceeding as follows.
Take the front adhesive off from the door and put the mechanical key
– provided with the product – into the
lock. You may now open the door manually.
NOTICE
Never leave the mechanical key and the hand terminal inside the safe.
UNIVERSAL SOCKET (OPTIONAL)
On request, a universal power socket can be provided. It will
be located on the inside of the door of the safe. It can
connect various devices
– for example, a personal computer
or a cell phone battery charger
– to the power mains. The
power supply cable of this socket comes out from the back
of the safe, and ends with three small cables (phase, neutral
and earth) which can be directly connected to the terminals
of the wiring system, or to a normal plug. In case of direct
connection to the wiring system, the wiring system must be
equipped with a complete line cut off device, with a contact
opening distance of at least 3.5mm. If the power supply
cable is connected to a normal plug, the plug must be
perfectly accessible.
