BE QUIET! Pure Power 9, Руководство пользователя

Страница: 5 / 52

Before using the power supply, allow it to warm up to room temperature for one
hour to prevent condensation accumulating in the power supply�
3. COMPATIBILITY
The be quiet! Pure Power 9 series power supplies are compatible with all recent
popular power supply and motherboard specifications such as:
∙
Intel ATX12V Power Supply Design Guide Version 2�4 (and downwardly
compatible to V2�31, V2�3, V2�2, V2�01, V2�0 )
∙
ATX System Design Guide Version 2�2 and Version 2�1
∙
BTX Version 1�0a
∙
E-ATX Server Dual Motherboards via 8-Pin Connector
∙
EPS 12V Version 2�92 (700W/600W)
∙
Intel C6/C7 Status for the new processor generation
∙
Energy Star 6�0 guidelines
∙
ErP guidelines
4. INSTALLING YOUR NEW POWER SUPPLY
Please read „Safety instructions“ before you begin the installation�
Note : You will need a screwdriver to fit the power supply in your PC. Only use the
screws provided with the power supply because they have the correct thread�
Caution: Only use the supplied cable set� Using cables that were not included (e�g�
cables of older power supply unit series) may lead to defects!
First remove your old power supply. To do so, proceed as follows:
∙
Carefully disconnect your PC from any power sources and unplug all cables
connected to the PC�
∙
Open the PC case, taking care to follow the manufacturer’s instructions�
∙
Disconnect all plugs from the motherboard and all other components, such as
FDDs, HDDs, or optical drives� Make sure that there are no plugs from the old
power supply connected to any of the components�
∙
Now remove the screws at the rear of the power supply and carefully pull the
power supply out of the PC case� Take special care that no cables get caught in
the components and damage them�
Fitting your new be quiet! Pure Power 9 power supply:
∙
Place the new power supply in the space provided in the PC case and connect
to the rear panel using the four screws provided� Do not use excessive force�
1. INTRODUCTION
We are delighted that you have chosen to use a be quiet! Pure Power 9 PSU in
your PC� Please read and follow all the information contained in these instructions
carefully prior to installation� Should you have any further questions, please contact
our customer service� See contact information in item Manufacturer's details�
2. SAFETY INSTRUCTIONS
The power supply is only guaranteed to function properly if the
instructions are followed�
Caution: Only use the supplied cable set� Using cables that were not included (e�g�
cables of older power supply unit series) may lead to defects!
Never open the power supply case� The electronic components inside the case
generate a high voltage that is dangerous to humans� Even after disconnecting
the power supply from the network, some parts still have high voltages� For this
reason, a power supply adapter should only be opened by an authorised technician�
Opening the device voids your warranty.
∙
Never handle the power supply with wet or damp hands when in operation�
∙
Never insert objects into the power supply’s apertures/fans�
∙
Note that the power supply is designed for use indoors in conditions without
high levels of moisture in the ambient air� Using the power supply outdoors will
lead to serious damage�
∙
Never work on the power supply while it is connected to the mains� In this case,
always set the power switch to "0" and / or disconnect the power plug�
∙
In the event of a short circuit in the device, unplug the mains cable and do not
use the device�
Make sure that your PC is not located directly next to a heating system or any other
source of heat�
Make sure that your computer case is sufficiently ventilated by means of additional
fans; with today’s complex and powerful systems a power supply is incapable of
dissipating the heat produced in the PC case without additional support�
If you want to clean your power supply, disconnect it completely from the mains
and never use a damp cloth or cleaning agent� Clean the power supply from the
outside using a dry cloth�
4 5