Be Cool eSC-Hi1, Руководство по эксплуатации

Страница: 31 / 47

ENGLISH
31
Control buttons
1. Power button:
Long press the power button to turn the device on and off.
2. Function key:
A: To shift gears: Press the function key once briefly.
Pedestrian mode: The gear indicator "D" is not displayed.
Normal mode: The gear indicator "D" lights up white.
Sport mode: The gear indicator "D" lights up red.
B: Pressing the function key twice briefly: switches the front and rear lights on and off.
When the front lights are on, the rear lights are always on.
3. Throttel button:
Stand on the scooter with one foot and push off with your foot to start moving; press the
throttel button to accelerate.
4. Brake:
hold the brake handle to brake. Lightly step on the rear fender to assist braking.
5. Cruise mode:
after turning on the constant speed cruise control function, maintain the current vehicle
speed for 6 seconds (vehicle speed ≥ 6km/h). Speed mode is automatically activated
and exited by pressing the accelerator control again or holding the brake.
Note: When the brake is active, pressing the throttle to accelerate is not allowed!
5. MONTAGE
5.1 Assemble
1. Unfold the pole and fasten
the folding lock.
2. Align the communication
line terminals of the
instrument and the controller
with the notch connection.
3. Align the T-bar of the
scooter then insert it into the
pole, use the screw provided
with the scooter to install and
fix it.
5.2 Disassemble
1.Loosen the screws that secure the T-
bar of the scooter.
2. Pull out the head of the scooter,
unplug the communication.