Seite 14 von 24
TABLE OF CONTENTS
Important Information about Safety, Site Location and Electrical
Connections
14
– 15
Recycling, Waste Management, Declaration of Conformity
15
– 16
Scope of Delivery
16
Description of Appliance
16
– 17
Commissioning
17
– 18
Remote control
18
– 19
Setting the functions
19
– 20
Tips for correct application
20
Maintenance and cleaning
21
– 22
Activities at the beginning/end of the season
22
Tracking and fixing problems
23
Technical informations
23
Warranty
24
PLEASE READ THE OPERATING MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION,
MONITORING, OPERATING, OR MAINTENANCE. PROTECT YOURSELF AND OTHERS BY
FOLLOWING THE SAFETY INSTRUCTIONS. FAILURE TO COMPLY WITH INSTRUCTIONS MAY
RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND/OR LOSS OF WARRANTY
CLAIMS!
IMPORTANT INFORMATION ABOUT SAFETY, SITE LOCATION AND
ELECTRICAL CONNECTIONS.
Use this appliance exclusively under the guidelines of this operating manual. Any other use not
recommended by the manufacturer may cause fire, electrical shock, or personal injury.
1.
This appliance is
intended exclusively for the cooling of living spaces in households
and
may not be used for any other purpose.
2.
The appliance is
not suitable for continuous and precision operation
and should not be
used for cooling electrical systems (e.g. in server rooms).
●
3.
Remove the packing and make sure that the appliance is not damaged. In case of doubt, do
not use the appliance, and contact the service centre or your dealer.
4.
If the appliance has a defect, switch it off and contact either your dealer or the customer hotline
5.
If the power supply cable is damaged, it must be replaced by the manufacturer or an authorised
service centre to avoid all possible risks.
6.
For any repairs, always contact the customer service offices authorised by the manufacturer.
You can access the customer service centres online at www.becool.at.
7.
Before connecting it to the mains power supply,
check that the mains voltage and the type
of electrical current matches the information provided on the type plate on the
appliance.
8.
The electrical outlet that the appliance must be connected to, must not be defective or loose
and must be suitable for the current load required, and, above all, must be reliably earthed.
In
case of doubt, have your electrical installation checked by a qualified electrician.
