Be.Better RX805, Инструкция по эксплуатации

Страница: 11 / 24

h) For those who cannot put the cuff on the left
arm, put it on the right arm as shown.
i) Consecutive measurements will cause blood
accumulation in the lower arm which will affect
the measuring results. To improve reading
accuracy, raise the arm being measured,
squeeze and relax your hand several times, then
take another measurement. Another option is
to take the cuff off and wait at least 10 minutes
before repeating measurement.
j) If this device was stored in low temperature, it is
necessary to leave it in room temperature for at
least 1 hour, otherwise the measurement can be
inaccurate.
ATTENTION: Do not use cuff other than the original cuff contained in this kit!
3. Battery Installation
1. Open the battery cover and install four ‘AA’ type batteries into the battery
compartment as indicated. Make sure that the polarity is correct.
2. Close the battery compartment cover.
• Replace the batteries when the replacement indication “ ” appears in the
display or nothing after
O/I
button is pressed.
• Use AA alkaline batteries, do not use rechargeable batteries.
h)
i)