BE Ag & Industrial BE-TMLR38, Руководство по эксплуатации и запасным частям

Страница: 10 / 20

10
BE-TMR2 USER MANUAL
Assemble the Lower Cover
Use 4pcs A (half round head square neck bolt M6 * 20)
and 4pcs D (non-metallic insert flange nut M6) to fix C
(bottom cover) on B (string trimmer cover).
Upper Handle
1. Remove the wing knob (a) and carriage bolt (b) from the left lower handle and the right lower handle.
See Figure 2-1.
2. Pivot the upper handle into the operating position. See Figure 2-1.
3. Move the upper handle into one of three positions by pivoting it forward or rearward.
Secure the upper handle to the lower handle using the wing knobs (a) and carriage bolts (b) removed in
Step 1. See Fig-ure 2-2.
NOTE: Make sure to use the corresponding hole on the left side as on the right side of the upper handle.
Starter Rope
1. Disconnect the spark plug boot from the spark plug
(refer to the Engine Operator’s Manual).
2. Pivot the throttle handle against the upper handle
and pull the rope out of the engine.
3. Loop the rope through the eye bolt. See Figure 2-3.
4. Tighten the eye bolt to the handle using the lock nut.
DO NOT overtighten.