BE Ag & Industrial AGRI EASE BE-VBM220, Руководство по эксплуатации и запасным частям

Страница: 4 / 18

4
BE-VBM220 USER MANUAL
Transport Machinery Safely
• Comply with state and local laws.
• Maximum transport speed for implement is 20 mph. Do not exceed. Never travel at a speed which does not
allow adequate control of steering and stopping. Rough terrain requires a slower speed.
• Sudden braking can cause a towed load to swerve and upset. Reduce speed if towed load is not equipped
with brakes.
• Use the following maximum speed - tow load weight ratios as a guideline: 20 mph when weight is less than
or equal to the weight of tractor. 10 mph when weight is double the weight of tractor.
• IMPORTANT: Do not tow a load that is more than double the weight of tractor.
Keep Riders Off Machinery
• Riders obstruct the operator’s view. They can be struck by foreign objects or thrown from the machine.
• Never allow children to operate equipment.
Practice Safe Maintenance
• Understand all procedures before doing work. Use proper tools and equipment. Refer to Operator’s Manual
for additional information.
• Work in a clean dry area.
• Lower implement to the ground, put tractor in park, turn off engine, and remove key before performing
maintenance.
• Allow implement to cool completely.
• Do not grease or oil implement while it is in operation.
• Inspect all parts. Make sure parts are in good condition and installed properly.
• Remove buildup of grease, oil and debris.
• Remove all tools and unused parts from implement before operation.
Prepare For Emergencies
• Be prepared if a fire starts.
• Keep a first aid kit and fire extinguisher handy.
• Keep emergency numbers for doctor, ambulance, hospital and fire department near phone.
Wear Protective Equipment
• Protective clothing and equipment should be worn.
• Wear clothing and equipment appropriate for the job. Avoid loose fitting clothing.
• Prolonged exposure to loud noise can cause hearing impairment or hearing loss.
Wear suitable hearing protection such as earmuffs or earplugs.
• Operating equipment safely requires the full attention of the operator. Avoid wearing headphones while
operating machinery.
Avoid High Pressure Fluids Hazard
• Escaping fluid under pressure can penetrate the skin causing serious injury.
• Avoid the hazard by relieving pressure before disconnecting hydraulic lines.
• Use a piece of paper or cardboard, not body parts, to check for suspected leaks.
Wear protective gloves and safety glasses or goggles when working with hydraulic systems.
• If an accident occurs, see a doctor immediately. Any fluid injected into the skin must be treated within a
few hours or gangrene may result.