BDV CXPS, Руководство пользователя

Страница: 37 / 128

. . . . .
I N S T A L L A T I O N I N S T R U C T I O N S
Final System Installation
CXPS Manual Edition 1.07 Installation
31
To exit the network connection, enter the command
exit
.
1 0 / 1 0 0 T E T H E R N E T O N L Y
1 Connect the control computer directly to the CXPS with an RS-232 direct-connect type
cable and a 10/100T Ethernet crossover cable.
2 Set the static IP address of the CXPS:
a
Establish RS-232 control of the CXPS as described in “RS-232 Only” on page 29.
b
Issue the
IPADDR
command using the static IP address assigned to the CXPS. For
example:
IPADDR 192.168.1.103
The CXPS is assigned the static IP address 192.168.1.103.
3 Set the static IP address of the control computer. If you are using Microsoft Windows,
follow these steps:
a
Click Start > All Programs > Accessories > Communications > Network Connections .
The Network Connections window appears.
b
Right-click on Local Area Connection and select Properties .
The Local Area Connection Properties window appears.
c
Click on Internet Protocol (TCP/IP) to highlight it and click Properties .
The Internet Protocol (TCP/IP) Properties window appears.
d
Select Use the following IP address and enter the static IP address assigned to your
control computer into the IP address field.
For example, enter
192.168.1.10
.
e
Click on Subnet mask and the number
255.255.255.0
should appear.
f
Enter the static IP address in the Default gateway field.
For example, enter
192.168.1.1
.
g
Click OK .
NOTE:
If the CXPS is powered off for several days, when the equipment is
powered back on, the DHCP server within the network may issue a new IP
address. If this happens, 10/100T Ethernet control can only be restarted by
beginning at
Step 3 and determining the new IP address using the RS-232
SHOWNET command again.