BDStar Harxon eRadio, Руководство пользователя, Страница: 39 / 44

Command
Name
Command Format Response Format Explanation
point is 456.05MHz
；
“transmitting frequency
point” and “MHz” for
separation;
Set up the
current
transmitting
frequency
point
tx transmitting
frequency point \r\n
e.g.:
tx 456.05\r\n
Indicate setting up
the current
transmitting
frequency point as
456.05MHz;
\r\nPROGRAMMED
OK\r\n>
Indicate the current
transmitting frequency
point is written
successfully

One space character is
between the strings
PROGRAMMED and OK for
separation;

Settable range of
transmitting frequency point
is:
410
≦
TX
≦
470
Current
protocol
query
prt\r\n
\r\n PRT protocol
type\r\n>
e.g.: \r\nPRT
TRIMTALK\r\n>
Indicate the current
radio protocol is
TRIMTALK

While querying protocol,
return the name of the
current radio work protocol;

Note: One space
character is between the
strings
“PRT” and “protocol
type” for separation;
“protocol type” has 8
characters in length, if the
name of the current protocol
type has less than 8
characters in length, use
space characters to fill; for
example, for protocol
SOUTH, there are 5
characters, 3 space
characters are additionally
needed;
Current
protocol
setting
prt protocol type\r\n
e.g.: prt TRIMTALK
\r\n
Indicate setting up
the current radio
work protocol as
TRIMTALK
\r\nPROGRAMMED
OK\r\n>
Indicate the current
radio protocol is written
successfully
Names of common
protocols:
TRANSEOT (equivalent to
transparent), TT450S,
TRIMTALK;
RF baud
rate query
baud\r\n
\r\nBAUD RF baud
rate\r\n>
e.g.: \r\nBAUD 9600
\r\n>
Indicate the current
radio RF baud rate is
9600

One space character is
between
“BAUD” and “RF
baud rate” for separation; 
“RF baud rate” has 6
characters in length, if the
current RF baud rate has
less than 6 characters in
length, use space characters
to fill; for example, for RF
baud rate of 9600, there are
only 4 characters, 2 space
characters are additionally
needed;