BDS RailMAB 960, Руководство по эксплуатации

Страница: 15 / 24

15 RailMAB 960
GB
WARNING
Risk of injury from engine starting
unintentionally!
Pay attention to the following safety notes
to avoid danger from the engine (12)
starting unintentionally.
For safe stopping of the engine (12):
► Move the accelerator (19) to the MIN
position.
► Move the ignition switch (20) of the
engine (12) to the OFF/AUS position.
► Close the fuel tap (21).
► Pay attention to the engine specifica -
tions of the manufacturer (12).
Setting the speed
The rotation speed is determined by the
engine speed.
The position of the accelerator (19) deter-
mines the speed of the drill.
■ MAX position
= max. speed (225 rpm)
■ MIN position
= min. speed (150 rpm)
Drilling with the machine
Drilling with core drills
When drilling with core drills, proceed as
follows:
‹
Insert the core drill into the 19 mm
Weldon (3/4") direct mounting of the
machine as described in the section
Inserting the tool
.
‹
Position the machine at the location of
use, align it and fix the machine with
the fast clamping system (5).
‹
Connect the high-pressure container
as described in the section Coolant/
lubrication
.
‹
Pressurise the cooling/lubrication sys-
tem (approx. 2-3 strokes with the hand
pumping device of the high-pressure
container).
‹
Switch the machine on.
‹
Guide the machine carriage with the
help of the feed lever (8) and without
exerting too much pressure until the
desired core drill is established.
Use