Instructions for use
MAB 480
6
Intended use
The machine is intended solely for drilling operations in magnetic
and non-magnetic metals, and for cutting threads, countersinking
and reaming within the limits specified in the technical data.
Use in any other or further way is not considered an intended use .
WARNING
Danger from use for other than the intended purpose!
If not used for its intended purpose and/or used in any other
way, the machine may be or become a source of danger .
►
Use the machine only for its intended purpose .
►
Observe the procedures described in these operating
instructions .
No claims of any kind will be accepted for damage or injury result-
ing from use of the machine for other than its intended purpose .
The risk has to be borne solely by the machine owner .
NOTE
►
If used commercially, pay attention to compliance with the
accident prevention regulations and the Safety at Work
Ordinance .
Liability disclaimer
All technical information, data and instructions for commissioning,
operation and care of the machine contained in these operating
instructions represent the latest status at the time of printing .
The manufacturer assumes no liability for damage or injury result-
ing from failure to observe the operating instructions, use for other
than the intended purpose, unprofessional repairs, unauthorised
modifications or use of non-approved spare parts and accesso
-
ries, tools and lubricants .
